Recent Posts

Pages: [1] 2 3 ... 10
1
ReefPI Software / restarting
« Last post by cio74 on December 20, 2017, 07:27:01 PM »
Hello,

Trust everyone is doing well, it's been a couple of busy years, shall we restart this project, anyone?

Cio
2
ReefPI Software / Re: Where are we?
« Last post by jimbob on August 21, 2016, 11:13:03 PM »
Ok i found a lighting controller that is going to work with my pi nodered setup i am using a nodemcu board and a  PCA9685 now but will be getting one of those "pictured" from Basil from the russian RC site ..
i am still working on doing http weather request then parsing that to send it to the lighting controller
https://reefcentral.ru/forum/topic/20952-wi-fi-led-16-kanalnyj-kontroller-ne-dorozhe-20/page-1

link to my build
http://www.brevardareareefsociety.com/forums/showthread.php?16373-started-mqtt-control-sys
James
3
ReefPI Software / Re: Where are we?
« Last post by cio74 on July 17, 2016, 07:21:55 PM »
is raspberry pi still popular? sorry, have not checked recently

has anyone produced something yet, some user interface with some working modules?
4
ReefPI Software / Re: Where are we?
« Last post by smudge on June 01, 2016, 01:28:16 PM »
Going to have a look at your git hub page once I get home, as I said above,
I had tried a few pi interfaces but I only briefly tried the node red despite it being built in to the latest jessie build
5
ReefPI Software / Re: Where are we?
« Last post by jimbob on June 01, 2016, 12:11:58 PM »
 upgrading my arduino controller it has a reef angel script running the lights now.
 i have my 4 way-power timer & temperature sensor using esp8266 and node red on a raspberry pi.
no i am not a programmer but i did hack up some examples to get it to work.
working on the lighting now using another esp8266. sunrise,set,weather moon phase..
i am getting the weather http request in and parsed to the pi ,working on arduino code for esp 8266 lighting..

https://github.com/jamesewilliamson/lot-stuff


6
ReefPI Software / Re: Where are we?
« Last post by cio74 on March 30, 2016, 07:33:41 PM »
I have had a look at them, interesting.

Currently I don't have any aquarium to play with but should get one for this project.
7
ReefPI Software / Re: Where are we?
« Last post by smudge on March 19, 2016, 08:01:23 PM »
I've tried Openhab, cayenne and tried to get my head around the adafruit.io site
8
ReefPI Software / Re: Where are we?
« Last post by cio74 on March 19, 2016, 11:24:51 AM »
Okay, we can re-start it, that's not a problem.

I think writing software for it was the biggest issue, what have you used in your attempts?
9
ReefPI Software / Re: Where are we?
« Last post by smudge on March 18, 2016, 10:30:20 PM »
Thanks for the congratulations, yes we've got girl number three!

Nothing much has moved forward at all as far as I can see.
I've been playing around a bit, but with no real direction.
 
I've been looking at Openhab and some other iot interfaces, but from my basic understanding they seem a bit lumpy
10
ReefPI Software / Re: Where are we?
« Last post by cio74 on March 18, 2016, 09:05:55 PM »
I'm all right, thanks. I think I have read you have another family member, congratulation.

I think there was no progress at all since a very long time?
Pages: [1] 2 3 ... 10